Clean Room Bio Safety Cabinet

Supply filter

Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% for 0.3 micron

Exhaust HEPA Filter

Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at exhaust position with an efficiency rating better than 99.999% for 0.3micron

Pre-filter

Pre-filters are made from Non-woven synthetic with HDPE mesh; conforms to EU-06 Grade, with an efficiency rating better than 95% down to 5 micron

Motor blower assembly

Motor blower designed of statically"and dynamically balanced for supply of sufficient Capacity and static pressure to take care of airflow requirement for entire life of HEPA.

Different Pressure Gauge

Dwyer Make Magnehelic Gauge (0 -25 mm: 2 Nos.) to monitor pressure drop across HEPA filter & work area with respect to ambient.

Lighting

Fluorescent Light (250 Lux) at work surface

ON/OFF Switches

SS ON/OFF Switches for motor & lights

SS 304 work table

SS 304 work table with perforations at front & back which can be removed occasionally for cleaning purpose

Front Door

1-Piece fully openable sliding toughened glass with counterweight arrangement

Door Opening Alarm

Alarm triggers in case front door is raised more than 8" (i.e. safe clear door opening during operation)

Exhaust Duct

SS 304 1 ft long elbow duct for exhaust

Side Panels

Double walled flushed Glass Side Panels

Electrical Supply

230V AC 1-  S5OHZ / 415V AC 3-  50HZ

Noise Level

Less than 67 dB on Scale when Ambient is not greater than 55 dB on Scale

Vibration Level

Minimum